Sign-in/Create An Account View Cart ($0.00)
Finger Jointing Lines Optimizing & Cut Off Notching Machines Radial Arm Mitre Chop Double Mitre Chop V Cutting Machines OMGA Stop  
Click to Enlarge
TR 2B NC

This 14" Double Mitre Saw is equipped with two heads one fixed on the left and one movable on the right, each having positive mitering stops at +45,-45 and 90 degrees. The machine is controlled by an electro-pneumatic system which enables the operator to select between three automatic working cycles: 1) Simultaneous cycling of both blades, 2)Alternate cycle allowing the machine to cut very short pieces at 45 degrees, 3) Single head cycling. The two standard pneumatic vertical clamps ensure the perfect stability of the workpiece. The unit also comes with standard overload protection on each of the two main motors. A wide variety of optional equipment is available for this system, such as additional vertical or horizontal pneumatic clamps, extended cutting length, brackets for short pieces, air over oil descent of the heads and spray mist system. The versatility of this unit makes it the perfect choice for any precision mitering application.


OMGA Store
TR 2B NC - $35,937.00
Select a Voltage:

TR 2B NC Media
Download Video Clip of TR 2B NC
Download Literature in PDF Format

Optional Equipment
Increased Motors to 4HP (TR 2B)
Increased Cutting Length to 11'4"
Increased Cutting Length to 14'7"
Increased Cutting Length to 18'
Front Pneumatic Clamp
Spray Mist System


Additional Photos


Detail of heads tilted at 45 Degrees
(Click for larger view)


Detail of USB and RS232 Ports
(Click for larger view)


Detail of NC Consolle
(Click for larger view)

Technical Data

TR 2B I INT VIS TR 2B TR 2A
Max. distance between saws 9' 2" 9' 2" 9' 2"
Min. distance between saws 23 5/8" 13 3/16" 8 3/4"
Min. distance between saws 45 Deg. 23 5/8" 18 1/8" or 9 7/16" (+ opt. + alt.) 15 1/8" or 6 11/16" (+ opt. + alt.)
Cross cut capacity 90 Deg. 6 3/4" 6 1/2" 5 1/2"
Cross cut capacity 45 Deg. 4 1/2" 4 1/2" 4"
Max. Depth of Cut 4 1/4" 4 1/4" 3 1/2"
Motor Power HP 2 x 4 HP 2 x 3 HP 2 x 3 HP
Max. Beveled Cross Cut 6 3/4" N/A N/A
Saw Bore 1" 1" 1"
Saw Diameter 370 mm (15") 14" 12"
Arbor Speed RPM 3200 3200 3200
Dust Chute 2 x 3 1/8" 2 x 3 1/8" 2 x 3 1/8"
Crated Dimensions 152" X 45" X 65" 150" X 39" X 53" 150" X 39" X 44"
Approx. Shipping Weight Lbs. 1,753 1,573 1,438